Sapphire Emerald™ Lightweight Cut Resistant Gloves with Nitrile Foam Coating and Palm Dots - LIMITED STOCK - SKG00101E
Sapphire Emerald™ Lightweight Cut Resistant Gloves with Nitrile Foam Coating and Palm Dots - LIMITED STOCK - SKG00101E
Product Features
- 18-gauge green shell has an HPPE inside and glass/nylon on the outside for great dexterity and maximum comfort
- Nitrile coated palm is breathable and provides abrasion resistance
- Foam nitrile finish provides excellent dry, wet, and oily grip
- Nitrile dotted palm increases abrasion resistance and grip
- Reinforced thumb crotch increases abrasion resistance in vulnerable area
- Contact heat protection up to 100°C / 212°F for a short period (15 sec max)
- Knit wrist cuff offers users a secure, comfortable fit and prevents gloves from slipping off during use
- EN 388:2016 + A1:2018 Levels: 4X31B
- EN 407:2020 Levels: X1XXXX
- Meets ANSI/ISEA 105-2016 standard
- Cut Level A2
- Abrasion Level 5
- Puncture Level 2
Certifications
ANSI/ISEA 105:2016
A2 | 5 | 2
EN 388:2016
4X31B
EN 407:2004
X1XXXX
Further Information
Designed for precision and protection, this lightweight cut-resistant glove offers an optimal balance of comfort, dexterity, and durability. Constructed with an 18-gauge seamless liner, the interior features HPPE for enhanced comfort, while the exterior combines glass fiber and nylon for increased durability and cut protection. The nitrile foam palm coating provides excellent grip in dry, greasy, and lightly oily environments, while additional palm dots boost grip performance even further. A reinforced thumb crotch extends the glove’s wear life, particularly in high-stress areas. Ideal for handling sharp components, this glove also offers contact heat resistance up to 100°C (212°F) for short durations (up to 15 seconds). The seamless knit construction minimizes irritation, and the knit wrist ensures a secure and comfortable fit throughout extended use.
Product Specifics
| Coating Type | Palm |
|---|---|
| Cuff Style | Knit Wrist |
| Gauge | 18-Gauge |
| Series | Sapphire™ |
Certifications
| ANSI/ISEA 105:2016 | A2, 5, 2 |
|---|---|
| EN 388:2016 | 4X31B |
| EN 407:2004 | X1XXXX |
ANSI/ISEA 105:2016
| Value | A2, 5, 2 | |
|---|---|---|
| Cut Resistance | A2(A1-A9) | |
| Abrasion Resistance | 5(1-6) | |
| Puncture Resistance | 2(1-5) |
EN 388:2016
| Value | 4X31B | |
|---|---|---|
| Abrasion Resistance | 4(1-4) | |
| Tearing Resistance | 3(1-4) | |
| Puncture Resistance | 1(1-4) | |
| Cut Resistance (TDM Test) | B(A-F) |
EN 407:2004
| Value | X1XXXX | |
|---|---|---|
| Contact Heat Resistance | 1(1-4) |
More Information
| Brand | Skytec™ |
|---|---|
| Sizes | 6(XS)-12(3XL) |
| Style | General Purpose Coated Gloves |
| Coating | Nitrile |
| Coating Color | Black |
| Coating Type | Palm |
| Cuff | Knit Wrist |
| Finish | Foam with Dots |
| Gauge | 18-Gauge |
| Retail Ready | No |
| Shell | Engineered HPPE |
| Shell Color | Green |
| Cleaning/Maintenance | To clean, wipe with a damp cloth. Note: The performance characteristics of worn and laundered gloves may differ from the results shown. Inspect the gloves to ensure no damage is present. |
| Color | Black and Green |
| Lifetime | Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use. |
| Recommendations for Use | General handling glove with cut protection. Not suitable for heat, thermal, electrical, or chemical protection. Do not use near moving machines if there is a risk of entanglement. |
| Storage | Store in dry conditions in the original packaging and away from direct sunlight. |
| Series | Sapphire™ |
| Brand | Skytec™ |
|---|---|
| Sizes | 6(XS)-12(3XL) |
| Style | General Purpose Coated Gloves |
| Coating | Nitrile |
| Coating Color | Black |
| Coating Type | Palm |
| Cuff | Knit Wrist |
| Finish | Foam with Dots |
| Gauge | 18-Gauge |
| Retail Ready | No |
| Shell | Engineered HPPE |
| Shell Color | Green |
| Cleaning/Maintenance | To clean, wipe with a damp cloth. Note: The performance characteristics of worn and laundered gloves may differ from the results shown. Inspect the gloves to ensure no damage is present. |
| Color | Black and Green |
| Lifetime | Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use. |
| Recommendations for Use | General handling glove with cut protection. Not suitable for heat, thermal, electrical, or chemical protection. Do not use near moving machines if there is a risk of entanglement. |
| Storage | Store in dry conditions in the original packaging and away from direct sunlight. |
| Series | Sapphire™ |
| Brand | Skytec™ |
|---|---|
| Sizes | 6(XS)-12(3XL) |
| Style | General Purpose Coated Gloves |
| Coating | Nitrile |
| Coating Color | Black |
| Coating Type | Palm |
| Cuff | Knit Wrist |
| Finish | Foam with Dots |
| Gauge | 18-Gauge |
| Retail Ready | No |
| Shell | Engineered HPPE |
| Shell Color | Green |
| Cleaning/Maintenance | To clean, wipe with a damp cloth. Note: The performance characteristics of worn and laundered gloves may differ from the results shown. Inspect the gloves to ensure no damage is present. |
| Color | Black and Green |
| Lifetime | Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use. |
| Recommendations for Use | General handling glove with cut protection. Not suitable for heat, thermal, electrical, or chemical protection. Do not use near moving machines if there is a risk of entanglement. |
| Storage | Store in dry conditions in the original packaging and away from direct sunlight. |
| Series | Sapphire™ |
| Brand | Skytec™ |
|---|---|
| Sizes | 6(XS)-12(3XL) |
| Style | General Purpose Coated Gloves |
| Coating | Nitrile |
| Coating Color | Black |
| Coating Type | Palm |
| Cuff | Knit Wrist |
| Finish | Foam with Dots |
| Gauge | 18-Gauge |
| Retail Ready | No |
| Shell | Engineered HPPE |
| Shell Color | Green |
| Cleaning/Maintenance | To clean, wipe with a damp cloth. Note: The performance characteristics of worn and laundered gloves may differ from the results shown. Inspect the gloves to ensure no damage is present. |
| Color | Black and Green |
| Lifetime | Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use. |
| Recommendations for Use | General handling glove with cut protection. Not suitable for heat, thermal, electrical, or chemical protection. Do not use near moving machines if there is a risk of entanglement. |
| Storage | Store in dry conditions in the original packaging and away from direct sunlight. |
| Series | Sapphire™ |
| Brand | Skytec™ |
|---|---|
| Sizes | 6(XS)-12(3XL) |
| Style | General Purpose Coated Gloves |
| Coating | Nitrile |
| Coating Color | Black |
| Coating Type | Palm |
| Cuff | Knit Wrist |
| Finish | Foam with Dots |
| Gauge | 18-Gauge |
| Retail Ready | No |
| Shell | Engineered HPPE |
| Shell Color | Green |
| Cleaning/Maintenance | To clean, wipe with a damp cloth. Note: The performance characteristics of worn and laundered gloves may differ from the results shown. Inspect the gloves to ensure no damage is present. |
| Color | Black and Green |
| Lifetime | Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use. |
| Recommendations for Use | General handling glove with cut protection. Not suitable for heat, thermal, electrical, or chemical protection. Do not use near moving machines if there is a risk of entanglement. |
| Storage | Store in dry conditions in the original packaging and away from direct sunlight. |
| Series | Sapphire™ |
| Brand | Skytec™ |
|---|---|
| Sizes | 6(XS)-12(3XL) |
| Style | General Purpose Coated Gloves |
| Coating | Nitrile |
| Coating Color | Black |
| Coating Type | Palm |
| Cuff | Knit Wrist |
| Finish | Foam with Dots |
| Gauge | 18-Gauge |
| Retail Ready | No |
| Shell | Engineered HPPE |
| Shell Color | Green |
| Cleaning/Maintenance | To clean, wipe with a damp cloth. Note: The performance characteristics of worn and laundered gloves may differ from the results shown. Inspect the gloves to ensure no damage is present. |
| Color | Black and Green |
| Lifetime | Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use. |
| Recommendations for Use | General handling glove with cut protection. Not suitable for heat, thermal, electrical, or chemical protection. Do not use near moving machines if there is a risk of entanglement. |
| Storage | Store in dry conditions in the original packaging and away from direct sunlight. |
| Series | Sapphire™ |
| Brand | Skytec™ |
|---|---|
| Sizes | 6(XS)-12(3XL) |
| Style | General Purpose Coated Gloves |
| Coating | Nitrile |
| Coating Color | Black |
| Coating Type | Palm |
| Cuff | Knit Wrist |
| Finish | Foam with Dots |
| Gauge | 18-Gauge |
| Retail Ready | No |
| Shell | Engineered HPPE |
| Shell Color | Green |
| Cleaning/Maintenance | To clean, wipe with a damp cloth. Note: The performance characteristics of worn and laundered gloves may differ from the results shown. Inspect the gloves to ensure no damage is present. |
| Color | Black and Green |
| Lifetime | Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use. |
| Recommendations for Use | General handling glove with cut protection. Not suitable for heat, thermal, electrical, or chemical protection. Do not use near moving machines if there is a risk of entanglement. |
| Storage | Store in dry conditions in the original packaging and away from direct sunlight. |
| Series | Sapphire™ |
Selected Option Specifics
| SKU | SKG00101EB |
|---|---|
| Size | 6(XS) |
| Main Color | Black and Green |
| SKU | SKG00101ED |
|---|---|
| Size | 7(S) |
| Main Color | Black and Green |
| SKU | SKG00101EF |
|---|---|
| Size | 8(M) |
| Main Color | Black and Green |
| SKU | SKG00101EH |
|---|---|
| Size | 9(L) |
| Main Color | Black and Green |
| SKU | SKG00101EJ |
|---|---|
| Size | 10(XL) |
| Main Color | Black and Green |
| SKU | SKG00101EL |
|---|---|
| Size | 11(2XL) |
| Main Color | Black and Green |
| SKU | SKG00101EN |
|---|---|
| Size | 12(3XL) |
| Main Color | Black and Green |
You may also like
Torq™ Nitrile Coated Tuffalene® Platinum 21-Gauge Touchscreen Gloves with Cut and Impact Protection - CIA921NFT
Torq™ Nitrile Coated Tuffalene® Platinum 21-Gauge Touchscreen Gloves with Cut and Impact Protection - CIA921NFT
ANSI/ISEA 105:2016:A4, 5, 2 | ANSI 138:2019:Level 1 | EN 388:2016:3341CP
Vise Gripster® C.I.A. Cut, Impact, Abrasion, and Puncture Resistant Nitrile Coated Aralene® Gloves - CIA609MF
Vise Gripster® C.I.A. Cut, Impact, Abrasion, and Puncture Resistant Nitrile Coated Aralene® Gloves - CIA609MF
ANSI/ISEA 105:2016:A5, 6, 3 | ANSI 138:2019:Level 1 | EN 388:2016:4X31E | EN 407:2004:X2XXXX
Sapphire Emerald™ Lightweight Cut Resistant Gloves with Nitrile Foam Coating and Palm Dots - LIMITED STOCK - SKG00101E
Enquiry for:
Sapphire Emerald™ Lightweight Cut Resistant Gloves with Nitrile Foam Coating and Palm Dots - LIMITED STOCK - SKG00101E
Sapphire Emerald™ Lightweight Cut Resistant Gloves with Nitrile Foam Coating and Palm Dots - LIMITED STOCK - SKG00101E