Aria Lite™ Nitrile-Coated General-Purpose Gloves with High Breathability and Superior Abrasion Resistance - SKG00061F
Aria Lite™ Nitrile-Coated General-Purpose Gloves with High Breathability and Superior Abrasion Resistance - SKG00061F
Product Features
- 15-gauge nylon/spandex shell offers bare hand sensitivity
- Foam nitrile provides excellent dry, wet, and oily grip with breathability
- Nitrile coated palm is breathable and provides abrasion resistance
- Contact heat protection up to 100°C / 212°F for a short period (15 sec max)
- Anatomically engineered for maximum fit
- Knit wrist cuff offers users a secure, comfortable fit and prevents gloves from slipping off during use
- EN 388:2016 + A1:2018 Levels: 4131A
- EN 407:2020 Levels: X1XXXX
- Meets ANSI/ISEA 105-2016 standard
- Cut Level A1
- Abrasion Level 4
- Puncture Level 2
Certifications
ANSI/ISEA 105:2016
A1 | 4 | 2
EN 388:2016
4131A
EN 407:2004
X1XXXX
Further Information
Engineered for performance, these lightweight general-purpose gloves features a thin yet highly durable nitrile foam palm coating, delivering excellent abrasion resistance and superior grip in both wet and dry environments. The seamless nylon/spandex shell ensures maximum breathability, while offering a close anatomical fit for enhanced comfort and dexterity during prolonged use. Ideal for precision tasks, this glove also provides contact heat protection up to 212°F (100°C) for short durations (15 seconds max), making it suitable for light thermal applications. Designed with both safety and usability in mind, this glove is perfect for a wide range of industrial, assembly, and maintenance tasks where durability, grip, and comfort are critical.
Product Specifics
| Coating Type | Palm |
|---|---|
| Cuff Style | Knit Wrist |
| Gauge | 15-Gauge |
Certifications
| ANSI/ISEA 105:2016 | A1, 4, 2 |
|---|---|
| EN 388:2016 | 4131A |
| EN 407:2004 | X1XXXX |
ANSI/ISEA 105:2016
| Value | A1, 4, 2 | |
|---|---|---|
| Cut Resistance | A1(A1-A9) | |
| Abrasion Resistance | 4(1-6) | |
| Puncture Resistance | 2(1-5) |
EN 388:2016
| Value | 4131A | |
|---|---|---|
| Abrasion Resistance | 4(1-4) | |
| Cut Resistance (Coup Test) | 1(1-5) | |
| Tearing Resistance | 3(1-4) | |
| Puncture Resistance | 1(1-4) | |
| Cut Resistance (TDM Test) | A(A-F) |
EN 407:2004
| Value | X1XXXX | |
|---|---|---|
| Contact Heat Resistance | 1(1-4) |
More Information
| Brand | Skytec™ |
|---|---|
| Sizes | 6(XS)-12(3XL) |
| Style | General Purpose Coated Gloves |
| Coating | Nitrile |
| Coating Color | Black |
| Coating Type | Palm |
| Cuff | Knit Wrist |
| Finish | Foam |
| Gauge | 15-Gauge |
| Shell | Nylon/Spandex |
| Shell Color | Gray |
| Caution | Avoid using near moving machinery due to entanglement hazard. |
| Cleaning/Maintenance | Check that the glove does not have any holes, cracks, tears, or color changes and discard any glove presenting such defects. Gloves should not be left in a contaminated condition if reuse is intended, in which case gloves should be cleaned as much as possible. To clean, wipe with a damp cloth. |
| Color | Gray and Black |
| Disposal | When stored as recommended, the gloves will not suffer a change in mechanical properties for up to three years from the date of manufacture. Service life cannot be specified and depends on the application and it is the responsibility of user to ascertain suitability of the glove for its intended use. |
| Lifetime | Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use. |
| Recommendations for Use | Gloves are designed to protect against intermediate risk which may include general material handling, assembly, and maintenance. The glove provides protection against slipping, dirt, and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the always wear the correct size. Check for damage before use. Never use a damaged glove. |
| Storage | Ideally stored in dry conditions between 50°F and 86°F in the original packaging and sheltered from direct light. Do not exceed 104°F. If the materials of the gloves are known to lose their performances during recommended storage please ensure that the storage will not change the glove characteristics significantly. |
| Brand | Skytec™ |
|---|---|
| Sizes | 6(XS)-12(3XL) |
| Style | General Purpose Coated Gloves |
| Coating | Nitrile |
| Coating Color | Black |
| Coating Type | Palm |
| Cuff | Knit Wrist |
| Finish | Foam |
| Gauge | 15-Gauge |
| Shell | Nylon/Spandex |
| Shell Color | Gray |
| Caution | Avoid using near moving machinery due to entanglement hazard. |
| Cleaning/Maintenance | Check that the glove does not have any holes, cracks, tears, or color changes and discard any glove presenting such defects. Gloves should not be left in a contaminated condition if reuse is intended, in which case gloves should be cleaned as much as possible. To clean, wipe with a damp cloth. |
| Color | Gray and Black |
| Disposal | When stored as recommended, the gloves will not suffer a change in mechanical properties for up to three years from the date of manufacture. Service life cannot be specified and depends on the application and it is the responsibility of user to ascertain suitability of the glove for its intended use. |
| Lifetime | Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use. |
| Recommendations for Use | Gloves are designed to protect against intermediate risk which may include general material handling, assembly, and maintenance. The glove provides protection against slipping, dirt, and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the always wear the correct size. Check for damage before use. Never use a damaged glove. |
| Storage | Ideally stored in dry conditions between 50°F and 86°F in the original packaging and sheltered from direct light. Do not exceed 104°F. If the materials of the gloves are known to lose their performances during recommended storage please ensure that the storage will not change the glove characteristics significantly. |
| Brand | Skytec™ |
|---|---|
| Sizes | 6(XS)-12(3XL) |
| Style | General Purpose Coated Gloves |
| Coating | Nitrile |
| Coating Color | Black |
| Coating Type | Palm |
| Cuff | Knit Wrist |
| Finish | Foam |
| Gauge | 15-Gauge |
| Shell | Nylon/Spandex |
| Shell Color | Gray |
| Caution | Avoid using near moving machinery due to entanglement hazard. |
| Cleaning/Maintenance | Check that the glove does not have any holes, cracks, tears, or color changes and discard any glove presenting such defects. Gloves should not be left in a contaminated condition if reuse is intended, in which case gloves should be cleaned as much as possible. To clean, wipe with a damp cloth. |
| Color | Gray and Black |
| Disposal | When stored as recommended, the gloves will not suffer a change in mechanical properties for up to three years from the date of manufacture. Service life cannot be specified and depends on the application and it is the responsibility of user to ascertain suitability of the glove for its intended use. |
| Lifetime | Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use. |
| Recommendations for Use | Gloves are designed to protect against intermediate risk which may include general material handling, assembly, and maintenance. The glove provides protection against slipping, dirt, and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the always wear the correct size. Check for damage before use. Never use a damaged glove. |
| Storage | Ideally stored in dry conditions between 50°F and 86°F in the original packaging and sheltered from direct light. Do not exceed 104°F. If the materials of the gloves are known to lose their performances during recommended storage please ensure that the storage will not change the glove characteristics significantly. |
| Brand | Skytec™ |
|---|---|
| Sizes | 6(XS)-12(3XL) |
| Style | General Purpose Coated Gloves |
| Coating | Nitrile |
| Coating Color | Black |
| Coating Type | Palm |
| Cuff | Knit Wrist |
| Finish | Foam |
| Gauge | 15-Gauge |
| Shell | Nylon/Spandex |
| Shell Color | Gray |
| Caution | Avoid using near moving machinery due to entanglement hazard. |
| Cleaning/Maintenance | Check that the glove does not have any holes, cracks, tears, or color changes and discard any glove presenting such defects. Gloves should not be left in a contaminated condition if reuse is intended, in which case gloves should be cleaned as much as possible. To clean, wipe with a damp cloth. |
| Color | Gray and Black |
| Disposal | When stored as recommended, the gloves will not suffer a change in mechanical properties for up to three years from the date of manufacture. Service life cannot be specified and depends on the application and it is the responsibility of user to ascertain suitability of the glove for its intended use. |
| Lifetime | Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use. |
| Recommendations for Use | Gloves are designed to protect against intermediate risk which may include general material handling, assembly, and maintenance. The glove provides protection against slipping, dirt, and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the always wear the correct size. Check for damage before use. Never use a damaged glove. |
| Storage | Ideally stored in dry conditions between 50°F and 86°F in the original packaging and sheltered from direct light. Do not exceed 104°F. If the materials of the gloves are known to lose their performances during recommended storage please ensure that the storage will not change the glove characteristics significantly. |
| Brand | Skytec™ |
|---|---|
| Sizes | 6(XS)-12(3XL) |
| Style | General Purpose Coated Gloves |
| Coating | Nitrile |
| Coating Color | Black |
| Coating Type | Palm |
| Cuff | Knit Wrist |
| Finish | Foam |
| Gauge | 15-Gauge |
| Shell | Nylon/Spandex |
| Shell Color | Gray |
| Caution | Avoid using near moving machinery due to entanglement hazard. |
| Cleaning/Maintenance | Check that the glove does not have any holes, cracks, tears, or color changes and discard any glove presenting such defects. Gloves should not be left in a contaminated condition if reuse is intended, in which case gloves should be cleaned as much as possible. To clean, wipe with a damp cloth. |
| Color | Gray and Black |
| Disposal | When stored as recommended, the gloves will not suffer a change in mechanical properties for up to three years from the date of manufacture. Service life cannot be specified and depends on the application and it is the responsibility of user to ascertain suitability of the glove for its intended use. |
| Lifetime | Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use. |
| Recommendations for Use | Gloves are designed to protect against intermediate risk which may include general material handling, assembly, and maintenance. The glove provides protection against slipping, dirt, and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the always wear the correct size. Check for damage before use. Never use a damaged glove. |
| Storage | Ideally stored in dry conditions between 50°F and 86°F in the original packaging and sheltered from direct light. Do not exceed 104°F. If the materials of the gloves are known to lose their performances during recommended storage please ensure that the storage will not change the glove characteristics significantly. |
| Brand | Skytec™ |
|---|---|
| Sizes | 6(XS)-12(3XL) |
| Style | General Purpose Coated Gloves |
| Coating | Nitrile |
| Coating Color | Black |
| Coating Type | Palm |
| Cuff | Knit Wrist |
| Finish | Foam |
| Gauge | 15-Gauge |
| Shell | Nylon/Spandex |
| Shell Color | Gray |
| Caution | Avoid using near moving machinery due to entanglement hazard. |
| Cleaning/Maintenance | Check that the glove does not have any holes, cracks, tears, or color changes and discard any glove presenting such defects. Gloves should not be left in a contaminated condition if reuse is intended, in which case gloves should be cleaned as much as possible. To clean, wipe with a damp cloth. |
| Color | Gray and Black |
| Disposal | When stored as recommended, the gloves will not suffer a change in mechanical properties for up to three years from the date of manufacture. Service life cannot be specified and depends on the application and it is the responsibility of user to ascertain suitability of the glove for its intended use. |
| Lifetime | Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use. |
| Recommendations for Use | Gloves are designed to protect against intermediate risk which may include general material handling, assembly, and maintenance. The glove provides protection against slipping, dirt, and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the always wear the correct size. Check for damage before use. Never use a damaged glove. |
| Storage | Ideally stored in dry conditions between 50°F and 86°F in the original packaging and sheltered from direct light. Do not exceed 104°F. If the materials of the gloves are known to lose their performances during recommended storage please ensure that the storage will not change the glove characteristics significantly. |
| Brand | Skytec™ |
|---|---|
| Sizes | 6(XS)-12(3XL) |
| Style | General Purpose Coated Gloves |
| Coating | Nitrile |
| Coating Color | Black |
| Coating Type | Palm |
| Cuff | Knit Wrist |
| Finish | Foam |
| Gauge | 15-Gauge |
| Shell | Nylon/Spandex |
| Shell Color | Gray |
| Caution | Avoid using near moving machinery due to entanglement hazard. |
| Cleaning/Maintenance | Check that the glove does not have any holes, cracks, tears, or color changes and discard any glove presenting such defects. Gloves should not be left in a contaminated condition if reuse is intended, in which case gloves should be cleaned as much as possible. To clean, wipe with a damp cloth. |
| Color | Gray and Black |
| Disposal | When stored as recommended, the gloves will not suffer a change in mechanical properties for up to three years from the date of manufacture. Service life cannot be specified and depends on the application and it is the responsibility of user to ascertain suitability of the glove for its intended use. |
| Lifetime | Service life depends on the glove application and therefore cannot be specified. It is the responsibility of the user to ensure the glove is suitable for its intended use. |
| Recommendations for Use | Gloves are designed to protect against intermediate risk which may include general material handling, assembly, and maintenance. The glove provides protection against slipping, dirt, and moderate mechanical workload. Suitability of the product is to be ascertained per each particular work application as part of the end users risk assessment program. Use protective gloves only for the intended use and the always wear the correct size. Check for damage before use. Never use a damaged glove. |
| Storage | Ideally stored in dry conditions between 50°F and 86°F in the original packaging and sheltered from direct light. Do not exceed 104°F. If the materials of the gloves are known to lose their performances during recommended storage please ensure that the storage will not change the glove characteristics significantly. |
Selected Option Specifics
| SKU | SKG00061FB-6(XS) |
|---|---|
| Size | 6(XS) |
| Main Color | Gray and Black |
| SKU | SKG00061FD-7(S) |
|---|---|
| Size | 7(S) |
| Main Color | Gray and Black |
| SKU | SKG00061FF-8(M) |
|---|---|
| Size | 8(M) |
| Main Color | Gray and Black |
| SKU | SKG00061FH-9(L) |
|---|---|
| Size | 9(L) |
| Main Color | Gray and Black |
| SKU | SKG00061FJ-10(XL) |
|---|---|
| Size | 10(XL) |
| Main Color | Gray and Black |
| SKU | SKG00061FL-11(2XL) |
|---|---|
| Size | 11(2XL) |
| Main Color | Gray and Black |
| SKU | SKG00061FN-12(3XL) |
|---|---|
| Size | 12(3XL) |
| Main Color | Gray and Black |
You may also like
FrogWear® Nitrile Supported FDA Compliant Gloves with Cut Resistant Aramid Fiber Liner - 515KEV
FrogWear® Nitrile Supported FDA Compliant Gloves with Cut Resistant Aramid Fiber Liner - 515KEV
ANSI/ISEA 105:2016:A2, 3, 4 | EN 374-1:2016 Type A:A, J, K, L, M, N, O, P, S, T
Aria Lite™ Nitrile-Coated General-Purpose Gloves with High Breathability and Superior Abrasion Resistance - SKG00061F
Enquiry for:
Aria Lite™ Nitrile-Coated General-Purpose Gloves with High Breathability and Superior Abrasion Resistance - SKG00061F
Aria Lite™ Nitrile-Coated General-Purpose Gloves with High Breathability and Superior Abrasion Resistance - SKG00061F